Ethernet Settings - Intermec PC23 User Manual

Ethernet Settings

Setting
(IPv4) IP
Assignment
Method
(IPv4) IP Address
Subnet Mask
Default Router
DHCP Response
(IPv6) IP
Assignment
Method
(IPv6) IP Address
PC23 and PC43 Desktop Printer User Manual
• Clean Printhead
• Faulty Dot (Sent when a faulty dot is detected in the printhead,
which can lead to lower print quality)
This section describes the Ethernet IPv4 and IPv6 settings. To view
these settings:
From the printer Main Menu, select Settings > Communications
•
> Ethernet.
• From the printer web page, click the Configure tab >
Communications > Ethernet.
Description
Specifies how the printer obtains an IP address.
Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv4).
Specifies a number that defines the range of IP
addresses that can be used in a TCP/IP network.
Specifies the IP address of a router that is used when
a device sends a packet to another subnet or to an
unknown destination.
Specifies if the printer receives DHCP responses by
broadcast or unicast.
Specifies how the printer obtains an IP address (for
IPv6 networks).
Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv6).
Appendix A — Specifications and Default Settings
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
Automatic
Automatic
145