Error, Information, And Warning Alert Settings - Intermec PC23 User Manual

Appendix A — Specifications and Default Settings

Error, Information, and Warning Alert Settings

Alert Setting Descriptions
Setting
Status
Delay Repeat
Delay Unit
Message
Error Alert Default Settings
Error Alert
Out of Media
Out of Ribbon
Printer in Pause
Mode
Printer in Menu
Mode
Application Break
RFID Not Installed Disable
Printhead Lifted
Printhead Not
Detected
142
This section describes error, information, and warning alerts and
settings. To view these settings:
• From the printer web page, click the Configure tab > Alerts >
Error, Warning, or Information.
Note: These alert settings cannot be configured from the printer Main
Menu.
Alert settings apply to each of the error, information, or warning alerts
and are configured individually by alert.
Description
Determines if an alert is sent out for a specific printer event.
Sets how often the alert is sent out for a specific printer event. Range is 1 to
65535.
Selects the unit of measure that determines how often the alert is sent out.
Sets the message that is sent out with each alert for a specific printer event.
Delay
Status Repeat
Enable 1
Enable 1
Disable 1
Disable 1
Disable 1
1
Enable 1
Disable 1
Delay Unit Message
Occurrences Error - Out of media
Occurrences Error - Out of ribbon
Occurrences Printer in pause mode
Occurrences Printer in menu mode
Occurrences Error - Application Break
Occurrences Error -RFID not installed
Occurrences Error - Printhead lifted
Occurrences Error - Printhead not detected
PC23 and PC43 Desktop Printer User Manual