Before Starting Easy Replacement Procedure; Easy Replacement Procedure - Aastra DT69x User Manual

Dt69 series dect telephones
Hide thumbs Also See for DT69x:
Table of Contents

Advertisement

User Manual
Aastra DT69x DECT Telephones
• DECT registration
• User parameters (including User ID)
• Contacts
• The extension number is assigned to the new telephone.
The following settings are not replaced during the easy replacement:
• Call list
• Messages
• Bluetooth pairing list

13.5.1 Before Starting Easy Replacement Procedure

1
Check that both the old telephone (that is, the telephone to be replaced) and the
new telephone (that is, the replacement telephone) are of the same device type
(DT690 or DT692).
2
Check that the software of telephone is of version 2.8.19 or greater, by entering
*#34# in idle mode.
3
Check that the software of CR3 Charging Rack or DC4 Advanced Desktop Charger
is of version 1.3.7 or greater by using the PDM. See Configuration Manual, Aastra
DT390/DT69x DECT Telephones, TD 92503EN.
4
Make sure that the telephone batteries are charged before starting the easy
replacement procedure.
5
Switch off the new handset by long pressing

13.5.2 Easy Replacement Procedure

During the Easy Replacement procedure, the LEDs of the telephone and the charger follow
the same LED indications. This means that if the old telephone has a broken display, the
LED indications on the charger and on the telephone can be used to follow the
replacement procedure. Before and after easy replacement, the LEDs may have different
LED indications. For more details, see also
page 63.
IMPORTANT: Never remove a telephone from the charger until the instructions in the
05 October 2012 / Ver. PH1
PRELIMINARY
display or the LED tells you to do so (see status on the LED if the display is
broken). If there is an error indication, it may be allowed to remove the
telephone, see
11 Troubleshooting
After the old telephone has been in the charger, the new telephone needs
to be placed in the charger regardless if the replacement was successful or
not. Failing to do so may result in malfunction and the new telephone will
need to be sent for service.
.
LED Indications during Easy Replacement
on page 54 for further instructions.
TD 92474EN
on
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dt692Dt690

Table of Contents