Procedure Call - Aastra DT692 User Manual

USER GUIDE
20
116

Procedure Call

When configuring the functions Call services, In Call menu, Contacts, or
a shortcut/service to the Phone call function; the data added in these
functions is static. When entering the data for the function to be used, it
is possible to add a variable/character U that allows the user to enter
additional numerical characters before calling the number/sending the
data to a system.
See the following example for more information.
Example of configuration:
A user wants to create a service with the Phone call function. The PBX
requires that a prefix must be added to a phone number. In this case,
the user can pre-program the prefix and then enter the applicable
phone number when using the Phone call function.
1. Press Menu, or the confirmation button.
2. Select Services,
3. Select Add new.
4. In the name field enter Call no.
5. Select the function Phone call
In the Number field, enter the prefix to be used followed by the char-
acter "U". In this case, the text string is as follows *21*U. The char-
acter U represents an Enter number dialog where the user can
enter the phone number.
6. Press Save
When using the function, an Enter number dialog appears. If the user
enters "123" (or selects a contact with this number by pressing ) and
presses "OK", the number *21*123 will be dialed. Note that no call is
established before the user presses "OK", that is, post-dial.
1424-EN/LZT 103 088 Uen H 2014-04-03