Table of Contents
Advertisement
User Manual
Aastra DT69x DECT Telephones
13.3 Attach the Swivel-type Clip
Attach the swivel-type belt clip as described in the illustration below.
Figure 9. Screw the swivel-type clip into position.
13.4 Attach Cover for No Clip
Attach the enclosed cover as described in the illustration below when no clip is to be used.
Figure 10. Screw the cover into position.
13.5 Easy Replacement of Telephone
Easy replacement can be used if a telephone needs to be replaced due to, for example, a
broken display. The easy replacement procedure is done via the telephone display and the
DC4 Advanced Desktop Charger, or the CR3 Charging Rack.
Note: If the electrical connection is damaged, it is not possible to follow the Easy
Replacement procedure. Depending on fault, it might work to do a replacement via PDM/
CPDM. See Configuration Manual, Aastra DT390/DT69x DECT Telephones, TD 92503EN
The following settings are replaced during easy replacement:
05 October 2012 / Ver. PH1
PRELIMINARY
Figure 2.
TD 92474EN
60
Advertisement
Table of Contents
