Table of Contents
Advertisement
User Manual
Aastra DT69x DECT Telephones
8
9
10
11
12
13
14
2.1.1
Hot Keys
A Hot Key can be programmed to give access to frequently used functions such as dialling
a specific telephone number, a short cut on the menu, or sending an SMS. Any key
"0", "2" - "9" can be set to a Hot Key. A long press on any of these digits in stand by
mode are by default a short cut to the Call contact list.
2.1.2
Alphanumeric Keys
Note: Depending on the selected menu language and character setting in the CPDM3,
other characters can be available. This means that the character order can differ from the
figure below.
05 October 2012 / Ver. PH1
PRELIMINARY
Space
To add space between text
Sound off
Turn off/on audible signals in idle mode, silencing the ring signal at
incoming call, and also to turn the microphone on/off during a call.
Five-way navigation key
Use this key to step in the menu and when working in text mode.
,
,
, and
are used for stepping left/right and up/down in the
menu. The navigation key can be programmed, the
short cut to the Inbox, and
call it is possible to increase/decrease the volume by pressing
The middle key is for confirmation and in idle mode it is by default a
short cut to the main menu.
On-hook and On/Off key
Combined button; to end a call, to return to idle mode, and to switch
the telephone on/off by long press.
Color display
The full graphic type display is 128 pixels wide and 160 pixels high.
The display has multiple colours and backlighting.
Headset connector
The headset connector is for connecting a headset. The connector is
protected against dust by using the headset connector cover.
LED
Indicates incoming call, messaging, low battery, and charging.
is a short cut to Call contact. During a
TD 92474EN
is by default a
and .
5
Advertisement
Table of Contents
