Table of Contents
Advertisement
User Manual
Aastra DT69x DECT Telephones
Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. It is possible
to set the systems in priority by moving them up or down in the list.
Note: This is used in combination with system set to be "Automatic", see
on page 31.
1
Select "Priority".
2
Change the priority if needed by selecting "Up" or "Down". The priority will be
saved when "Back" is selected.
7.1.4
In Charger Action when in Call
It is possible to determine actions to be performed when a handset is placed in charger
during a call.
1
Select "In charger".
2
Select "Call behavior".
3
Select one of the following:
• No action - no action will be performed when handset is placed in charger
during a call.
• Loudspeaking - The loudspeaker will be activated when handset is placed in
charger during a call.
• End call - The call will be disconnected when handset is placed in charger.
7.1.5
In Charger Action when not in Call
It is possible to determine actions to be performed when a handset is not in call and
placed in charger.
Note: Additional In charger actions can also be configured, see the handset's
Configuration Manual.
1
Select "In charger".
2
Select "Other actions".
3
Select one of the following:
• No action - no action will be performed when handset is not in call and placed
in charger.
• Switch off - When the handset is placed in the charger it will switch off. When it
is removed from the charger it will switch on again.
• Sound off - When the handset is placed in the charger it will be muted. When it
is removed from the charger it will switch on the sound again. Note: Messages
with breakthrough (for example high/alarm priority) will not be muted.
• Redirect - Calls can be redirected to another extension when the handset is
placed in a charger. This function must be programmed in the PBX to be able to
redirect calls.
• Change profile - when the handset is placed in the charger it will change profile.
When the handset is removed from the charger, the profile is changed back
Press "Edit" and select the wanted profile. By default only the profile Normal is
selectable, but additional profiles will be visible if they are configured. See
Profiles
05 October 2012 / Ver. PH1
PRELIMINARY
on page 42
TD 92474EN
Change System
7.7
33
Advertisement
Table of Contents
