Starting An Announcement; Receiving An Announcement - Aastra 415 User Manual

Starting an announcement

You want to address internal users directly via their loudspeaker – where available –,
without waiting for a reply (similar principle to that of an intercom system).
Requirement: It is essential that the internal user has not barred his phone against
announcement (for configuration see the Chapter
types", page 82).
<Phone number>
Announcement
Ok

Receiving an announcement

Your phone rings once and then automatically initiates the announcement. The dis-
play shows . You will be addressed via your loudspeaker.
You can listen to the announcement or stop it.
eud-1292/1.1 – R1.0 – 09.2011
Enter the call number and press the
➔
The call number is displayed.
Note:
You can also find the call number of the user you want in the phone book or in
a call list.
Confirm with the Ok softkey.
➔
User is made aware of the announcement. You can now talk.
Or:
You can also start the announcement using
ment > User/Group.
To continue the announcement as a phone call:
Press the Call key.
➔
You are now connected to the person who initiated the announcement.
To stop the announcement:
Press the End key.
Supplementary features
"Activating protection against call
Announcement softkey.
Menu > Call features > Announce-
37