Adjusting The Print Darkness - Intermec 3400 User Manual

Adjusting the Print Darkness

Use the darkness adjust control in combination with the PrintSet software
configuration tool to fine-tune the darkness of print on your labels. The fine
adjustments compensate for variations in the media ("lot to lot"), the printhead,
or the printer. Set the darkness adjust control after you enter the media
sensitivity number.
To adjust the print darkness
1. Locate the darkness adjust control on the back of the printer.
2. Use a small straight-slot screwdriver to adjust the print darkness.
NugFont
HelvC
To increase the print darkness, turn the control clockwise.
To decrease the print darkness, turn the control counterclockwise.
O
C o d e 39
Optimizing Printer Performance
Turn the darkness
adjust control clockwise
for darker density
Turn the darkness adjust
control counterclockwise
for lighter density
3XXXU.037
Darkness
adjust control
Screwdriver
5
5-5