About This Manual - Intermec 3400 User Manual

NugFont
HelvC

About This Manual

Analysts and programmers should use this manual to learn how to operate,
program, and connect the 3400, 3440, or 3600 printer to a network or system.
The first part of this manual tells you how to install, operate, maintain, and
troubleshoot your printer. The last part of the manual covers advanced features
of the 3400, 3440, and 3600 printers. A basic understanding of DOS,
programming, and data communications is necessary.
What You Will Find in This Manual
This table summarizes the information in each chapter of this manual:
For Information On
Installing the printer
Operating the printer
Routine maintenance
Troubleshooting
Improving printer
performance
Test and Service
features
Specifications
Character sets
Communications
Full ASCII chart
C o d e 39
Refer To
Chapter 1, "Getting Started." Tells you how to plug in the
printer, load fanfold media, configure the serial port, and
print a configuration test label.
Chapter 2, "Operating the Printer." Explains the printer front
panel, tells you how to load roll media, load ribbon, test for
communications, and download fonts.
Chapter 3, "Maintaining the Printer." Shows how to maintain
the printer.
Chapter 4, "Troubleshooting." Instructs how to clear error
messages and troubleshoot programming or configuration
problems.
Chapter 5, "Optimizing Printer Performance." Tells you how
to fine-tune the printer to increase processing time.
Chapter 6, "Using Test and Service Mode." Provides
information on using Test and Service mode to print test
labels, perform Test and Service mode procedures, and
configure DIP switch settings.
Appendix A.
Appendix B.
Appendix C.
Appendix D.
Before You Begin
ix