3400, 3440, and 3600 Bar Code Label Printer User's Manual
To adjust the bias adjust screw
1. Remove the media cover and locate the bias adjust screw.
2. To compensate for uneven print quality, turn the bias adjust screw as
If printing is light on the
right side of label, turn the
bias adjust screw counterclockwise.
3. Replace the media cover.
5-4
In t e
r m e
c
3 4
0 0
shown. Adjusting the bias adjust screw causes the printhead to rest evenly
on the drive roller and results in even print quality.
NugFont
HelvC
If printing is light on
the left side of label, turn
the bias adjust screw clockwise.
C o d e 39
Bias adjust
screw
3XXXU.038
3XXXU.039