Printer Options; Memory Expansion And Fonts; Communication Interface - Intermec 3400 User Manual

3400, 3440, and 3600 Bar Code Label Printer User's Manual

Printer Options

This page contains a list of the options you can use with the printer along with
a brief description. Consult your Intermec representative to order any option.

Memory Expansion and Fonts

The memory expansion option is different for each printer. See the section that
applies to your printer.

Communication Interface

Twinax Interface
This option lets you connect your printer to an IBM twinaxial cable system with
a twinax interface so your printer emulates an IBM 5256 Model 1 printer and
can operate with an IBM System/34, System/36, System/38, or AS/400 host
computer.
A-10
3400 Printer
The 3400C memory expansion option replaces the 128K of SRAM with 512K of
SRAM to hold more formats, fonts, or bitmap graphics. It also increases the
printer's image buffering capabilities. Flash modules in 2, 6, or 8 MB are
available to increase storage capacity.
The kanji/katakana option allows the printer to print Japanese characters in
two Kanji fonts and three Katakana fonts. This option also provides increased
storage capacity.
3440 Printer
You can install a DRAM SIMM module into the SIMM socket on the main PCB
to hold more formats, fonts, or bitmap graphics. It also increases the image
buffering capabilities of the printer. Flash SIMM modules are available to
increase storage capacity. You can purchase either module in 4 or 8 MB sizes
only.
3600 Printer
The memory expansion option replaces the 128K of SRAM with 512K of SRAM
to hold more formats, fonts, or bitmap graphics. It also increases the image
buffering capabilities of the printer.
HelvC NugFont
C o d e 39