Replacing Hydrostatic Transmission Wire; Removal Of Hyrostatic Transmission Wire - Husqvarna Rider 15V2 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Reparation instructions

Replacing hydrostatic transmission wire

Removal of hydrostatic transmission wire
1
Remove the frame plate. The illustration shows Pro
15. For an illustration of the Pro 18 see 'Fitting
Hydrostatic Transmission Cable'.
2
Loosen the hydrostatic transmission's front lock nut
a 1/4 turn and remove the lock spring.
44
– English
www.mymowerparts.com
3
Remove the hydrostatic transmission wire's front
clamp fixed inside the middle bracket.
4
Remove the transmission cover.
5
Follow the hydrostatic transmission wire backwards
towards the transmission and cut off the cable ties
round the wire.
6 Rider 15V2
Remove the locking spring by the hydrostatic
transmission cable's rear link joint. Loosen the
bracket that holds the cable casing.