Setting Extra Rs-232C Options - NCR 7156 Owner's Manual

Chapter 5: Communication
4*
5, 6
*Switch 4 is not used if the parity is disabled (switch 3 set to OFF).

Setting Extra RS-232C Options

The following extra options are available for the RS-232C Interface:
These options are set with the DIP switches in level 1 diagnostics. See "Level 1
Diagnostics" earlier in this book for instructions on setting these options.
54
OFF
ON
5 6
OFF OFF
ON OFF
OFF ON
ON ON
Data errors
Print "?" for data errors (default)
Ignore data errors
Data buffer
Set data buffer = 4K bytes (default)
Set data buffer = one line
Odd Parity
Even Parity
19,200 Baud
9600 Baud (default)
4800 Baud
1200 Baud
September 1997
7156 Owner's Guide