Slip Station; Character Sets - NCR 7156 Owner's Manual

Appendix B: Print Characteristics

Slip Station

The slip station prints characters (standard pitch and compressed pitch) and graphics in a
print zone of 120.7 mm (4.752 inches) wide on a slip or form.
The print line height of 7 x 7 dot characters is 2.46 mm (.097 in). With three-dot spacing, the
print line height is 3.53 mm (.139 inches). See the following illustration (not to scale). To
print as close to the bottom of the slip as possible without the slip leaving the feed rollers,
use the Print and Feed n Lines (1B 64 n), with n = 0.

Character Sets

The next two pages show the character sets for Code Page 437 and Code Page 850.
122
Standard pitch: 66 characters (columns) per line
Compressed pitch: 80 characters (columns) per line
Paper Width: Not Restricted
Top Margin, 16 mm (.63 in.) Minimum
No Top Margin with Reverse Feed
Print Zone, 120.7 mm (4.752 in.)
Right Margin, 3.17 mm (.125 in.)
Bottom Margin: 15.0 mm (.59 in.)
(Without Reverse Feed)
September 1997
7156 Owner's Guide