Chapter 2: Setting Up And Using The Printer; What Is In The Box - NCR 7156 Owner's Manual

7156 Owner's Guide

Chapter 2: Setting Up and Using the Printer

What Is in the Box?

The following items are packed in the shipping box (printers shipped in bulk may not
include all of these items):
These items may be ordered as options from NCR and will be shipped separately:
Printer enclosed in a plastic bag and foam pack
Receipt paper roll (inside receipt bucket)
Test printout protecting the thermal printhead (inside receipt bucket)
Cardboard support for cantilever (on slip table)
Foam restraint for carriage (behind front cover)
Power supply with cable connecting to printer and power supply cord connecting to
power outlet (only if ordered with the printer)
Ribbon cassette (in box)
Two strain relief bushings for routing cables through the back panel
Clips for securing cables under the base
If not in the box, the clips will be attached or molded to the base
Installation report card (please complete this form and return to NCR)
7156 Thermal Receipt and Impact Slip Printer: Setup and User's Guide
Communication cable (from host computer to printer)
Cash drawer with cables (may be ordered from other equipment suppliers: see
"Ordering Other Supplies" in chapter 1)
Chapter 2: Setting Up and Using the Printer
September 1997 7