Chapter 2: Installing the Printer
Connecting Communication and Power Cables
Models receiving power from the host computer (integrated), use one cable for
communication and power. Models receiving power from a power supply (remote), use
one cable for communication and a separate cable for power.
Caution: Be sure that all power is disconnected before connecting the cables.
1.
2.
3.
RS-232C and LCSIO (RS-485) Models
12
Turn off the host computer or unplug the power supply if it is plugged in.
If the power supply is used, plug the power supply cable into the printer first, then
plug the power cord into the power supply, then into an outlet.
Connect the communication cable to the printer, then to the host computer.
August 1998
7193 Service Guide