Communication Interface; Rs-232C Serial Interface Settings - NCR 7194 Service Manual

2-14 Chapter 2: Diagnostics and Configuration

Communication Interface

RS-232C Serial Interface Settings

To change the Communication Interface settings, enter the
Configuration Menu, select "Set Communication Interface" from the
Main Menu and answer Yes to "SET INTERFACE TYPE?" printed on
the receipt.
Caution: Be extremely careful changing any of the printer settings to
avoid inadvertently changing other settings that might affect the
performance of the printer.
Press the Paper Feed Button as instructed to select the communication
interface you want.
•
Communication Interface
•
RS-232C Interface:1 click
•
IEEE1284 Interface:
To change the RS-232C Serial Interface settings, enter the Configuration
Menu, select "Set Communication Interface" from the Main Menu and
answer No to "SET INTERFACE TYPE?" printed on the receipt. This
will take you to the instructions for selecting the RS-232C settings.
Caution: Be extremely careful changing any of the printer settings to
avoid inadvertently changing other settings that might affect the
performance of the printer.
Press the Paper Feed Button as instructed on the configuration menu to
select the RS-232C settings you want to change.
•
Baud Rate
•
115200 baud: 1 click
•
57600 baud:
•
38400 baud:
•
19200 baud:
•
9600 baud: 5 clicks
2 clicks
2 clicks
3 clicks
4 clicks