Loading And Changing The Receipt Paper - NCR 7156 Owner's Manual

7156 Owner's Guide

Loading and Changing the Receipt Paper

Although the illustrations show a used roll being removed, the instructions apply to
loading paper for the first time.
Change the paper when either of the following two conditions occurs:
Caution: Do not operate the printer or host computer if the printer runs out of paper. The
printer will not operate without paper, but it may continue to accept data from the host
computer. Because the printer cannot print any transactions, the data may be lost.
Paper Status LED (red) flashes: the paper is low
There are approximately 1 ½ to 7 ½ meters (5-25 feet) of paper remaining on the roll.
Change the paper as soon as possible to avoid running out part way through a
transaction.
Depending on the application program, the host computer may alert you when the
paper is low.
Paper Status LED (red) turns on: the paper is out
Change the paper immediately or data may be lost.
Chapter 2: Setting Up and Using the Printer
September 1997 15