Figure 32: Client Qos Diffserv Class Map; Table 41: Diffserv Class Map - D-Link DWL-8600AP Administrator's Manual

Software User Manual
12/10/09
Field
Class Map Configuration
Class Map Name
Match Layer 3 Protocol
Match Criteria Configuration
Class Map Name
34CSFP6XXUAP-SWUM100-D13

Figure 32: Client QoS DiffServ Class Map

Table 41: DiffServ Class Map

Description
Enter a Class Map Name to add. The name can range from 1 to 31 alphanumeric
characters.
Specify whether to classify IPv4 or IPv6 packets.
Select name of the class to configure.
Use the fields in the Match Criteria Configuration area to match packets to a class.
Select the check box for each field to be used as a criterion for a class and enter data in
the related field. You can have multiple match criteria in a class.
Note: The match criteria fields that are available depend on whether the class map is
an IPv4 or IPv6 class map.
D-Link UAP
Creating a DiffServ Class Map Page 95