Viewing Details For A Cluster Member; Figure 39: Details For A Cluster Member Ap; Table 51: Cluster Member Details - D-Link DWL-8600AP Administrator's Manual

Software User Manual
12/10/09
V D
IEWING ETAILS FOR A
To view details on a cluster member AP, click on the IP address of a cluster member at the top of the page. The following
figure shows the Neighbor Details for Radio 1 of the AP with an IP address of 10.27.65.169.
The following table explains the details shown about the selected AP.
Field
SSID
MAC Address
Channel
Rate
Signal
Beacon Interval
Beacon Age
34CSFP6XXUAP-SWUM100-D13
C M
LUSTER EMBER

Figure 39: Details for a Cluster Member AP

Table 51: Cluster Member Details

Description
The Service Set Identifier (SSID) for the access point.
The SSID is an alphanumeric string of up to 32 characters that uniquely identifies a
wireless local area network. It is also referred to as the Network Name .
A Guest network and an Internal network running on the same access point must
always have two different network names.
Shows the MAC address of the neighboring access point.
A MAC address is a hardware address that uniquely identifies each node of a network.
Shows the channel on which the access point is currently broadcasting.
The Channel defines the portion of the radio spectrum that the radio uses for
transmitting and receiving.
Shows the rate (in megabits per second) at which this access point is currently
transmitting.
The current rate will always be one of the rates shown in Supported Rates.
Indicates the strength of the radio signal emitting from this access point as measured
in decibels (Db).
Shows the Beacon interval being used by this access point.
Beacon frames are transmitted by an access point at regular intervals to announce the
existence of the wireless network. The default behavior is to send a beacon frame once
every 100 milliseconds (or 10 per second).
Shows the date and time of the last beacon received from this access point.
Viewing Wireless Neighborhood Information
D-Link UAP
Page 113