Table of Contents
Advertisement
Section 3 - Configuration
Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. The DAP-X2810 supports
four priority levels. Once the desired QoS settings are finished, click the Save button to let your changes take effect.
Enable QoS:
Check this box to allow QoS to prioritize traffic. Use the
drop-down menus to select the four levels of priority.
Click the Save button when you are finished.
Downlink Bandwidth:
The downlink bandwidth in Mbits per second. This value
is entered in the Uplink/Downlink Setting window.
Uplink Bandwidth:
The uplink bandwidth in Mbits per second. This value is
entered in the Uplink/Downlink Setting window.
ACK/DHCP/ICMP/DNS
Click the drop-down menu to select the level of
Priority:
priority for the selected rule.
Web Traffic Priority:
Click the drop-down menu to select the level of
priority for the selected rule.
FTP Traffic Priority:
Click the drop-down menu to select the level of
priority for the selected rule.
User Defined-1/2/3/4
Click the drop-down menu to select the level of
Priority:
priority for the selected rule.
Other Traffic Priority:
Click the drop-down menu to select the level of
priority for the selected rule.
Save:
Click to save the updated configuration. To make the
updates permanent, click Configuration > Save and
Activate.
D-Link DAP-X2810 User Manual
QoS
62
Advertisement
Table of Contents
