Figure 9: Ethernet Settings; Table 12: Ethernet Settings Page - D-Link DWL-8600AP Administrator's Manual

D-Link UAP
The following table describes the fields to view or configure on the Ethernet Settings page.
Field Description
DNS Name Enter the DNS name (host name) for the AP in the text box.
The DNS name has the following requirements:
• Maximum of 20 characters
• Only letters, numbers and dashes
• Must start with a letter and end with either a letter or a number
MAC Address Shows the MAC address for the LAN interface for the Ethernet port on this AP. This is a read-only
field that you cannot change.
Management VLAN ID The management VLAN is the VLAN associated with the IP address you use to access the AP. The
default management VLAN ID is 1.
Provide a number between 1 and 4094 for the management VLAN ID.
Untagged VLAN If you disable the untagged VLAN, all traffic is tagged with a VLAN ID.
By default all traffic on the UAP uses VLAN 1, which is the default untagged VLAN. This means that
all traffic is untagged until you disable the untagged VLAN, change the untagged traffic VLAN ID, or
change the VLAN ID for a VAP or client using RADIUS.
Untagged VLAN ID Provide a number between 1 and 4094 for the untagged VLAN ID. Traffic on the VLAN that you
specify in this field will not be tagged with a VLAN ID.
Page 38 Ethernet Settings

Figure 9: Ethernet Settings

Table 12: Ethernet Settings Page

Software User Manual
12/10/09
34CSFP6XXUAP-SWUM100-D13