Diffserv Configuration - D-Link DWL-8600AP Administrator's Manual
Unified access point (ap)
Hide thumbs
Also See for DWL-8600AP:
- User manual (754 pages) ,
- Reference manual (36 pages) ,
- Installation manual (12 pages)
Table of Contents
Advertisement
D-Link UAP
6. Use the apQosGlobalMode object to set the status to up (1), which enables Client QoS on the AP.
7. Walk the apVapDescription object to view the instance ID for VAP 2 (wlan0vap2).
VAP 2 on Radio 1 is instance 5.
8. Use the apVapQosMode object to set the status of VAP 2 to up (1).
9. Use the apVapAclUp object to apply acl1 to VAP2 in the inbound direction (from the client to the AP).
The ACL name is the text string, and not the ASCII code.
DiffServ Configuration
1. Load the DLINK-WLAN-ACCESS-POINT-MIB module.
2. From the MIB tree, navigate to the objects in the apQos > apAclTable.
3. Use the apQosDsClassMapStatus object to set the status of the class map named class_voip to Create and Go (4).
The OID to set is 1.3.6.1.4.1.6132.1.1.28.10.4.1.2.10.99.108.97.115.115.95.118.111.105.112, where 10 is the number
of characters, and 99.108.97.115.115.95.118.111.105.112 is class_voip in ASCII code.
4. Configure class_voip to match all UDP packets from the 192.168.1.0 network that have a destination IP address of
192.168.2.200 (the VoIP server).
•
Set apQosDsClassMapMatchEvery to true (1).
•
Set apQosDsClassMapMatchProtocol to UDP (17).
•
Set apQosDsClassMapMatchSrcIpAddress to 192.168.1.0.
•
Set apQosDsClassMapMatchSrcIpMask to 255.255.255.0.
•
Set apQosDsClassMapMatchDestIpAddress to 192.168.2.200.
•
Set apQosDsClassMapMatchDestIpMask to 255.255.255.255
•
Set apQosDsClassMapMatchCommit to true (1).
5. Create a policy map named pol_voip (which is 112.111.108.95.118.111.105.112 in ASCII) by setting the value of the OID
1.3.6.1.4.1.6132.1.1.28.10.5.1.2.8.112.111.108.95.118.111.105.112 to Create and Go (4).
6. Define the pol_voip policy map by adding the class_voip class map and specifying that packets that match the class_voip
criteria will be marked with a DSCP value of EF (expedited forwarding).
•
Set apQosDsPolicyMapAttrStatus.8.112.111.108.95.118.111.105.112.10.99.108.97.115.115.95.118.111.105.112.1
to a value of 4 (Create and Go)
•
Set apQosDsPolicyMapAttrMarkIpDscp.8.112.111.108.95.118.111.105.112.10.99.108.97.115.115.95.118.111.105.
112.1 to 46 (which is the equivalent of ef).
7. Enable Client QoS on the AP.
Page 134
Configuring Client QoS
Software User Manual
12/10/09
34CSFP6XXUAP-SWUM100-D13
Hide quick links:
Advertisement
Table of Contents
