Software User Manual
12/10/09
C
R
ONFIGURING
This example shows how to configure Radio 2 with the following settings:
•
Mode: IEEE 802.11b/g/n
•
Channel: 6
•
Channel Bandwidth: 40 MHz
•
Maximum Stations: 100
•
Transmit Power: 75%
R
C
ADIO
ONFIGURATION FROM THE
1. Log onto the AP and navigate to the Manage > Radio page.
2. Make sure the number 2 appears in the Radio field and that the status is On.
3. From the Mode menu, select IEEE 802.11b/g/n.
4. From the Channel field, select 6.
5. From the Channel Bandwidth field, select 40 MHz.
6. In the Maximum Stations field, change the value to 100.
7. In the Transmit Power field, change the value to 75.
The following image shows the Radio page with the settings specified in this example.
34CSFP6XXUAP-SWUM100-D13
S
ADIO
ETTINGS
W
EB
I
NTERFACE
D-Link UAP
Configuring Radio Settings
Page 119