Appendix B: Configuration Examples; Configuring Avap; Vap Configuration From The Web Interface - D-Link DWL-8600AP Administrator's Manual

D-Link UAP
A pp e n di x B : C o nf i g ur a t io n E x a m p l e s
This appendix contains examples of how to configure selected features available on the UAP. Each example contains
procedures on how to configure the feature by using the Web interface, CLI, and SNMP.
This appendix describes how to perform the following procedures:
• Configuring a VAP
• Configuring Radio Settings
• Configuring the Wireless Distribution System
• Clustering Access Points
• Configuring Client QoS
For all SNMP examples, the objects you use to AP are in a private MIB. The path to the tables that contain the objects is
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).dlink(171).dlink-products(10).dwl-ap(37).dwlWLANAP(26).
C
ONFIGURING A
This example shows how to configure VAP 1 with the following non-default settings:
• VLAN ID: 2
• SSID: Marketing
• Security: WPA Personal using WPA2 with CCMP (AES)
VAP C
ONFIGURATION FROM THE
1. Log onto the AP and navigate to the Manage > VAP page.
2. In the Enabled column for VAP 1, select the check box.
3. Enter 2 in the VLAN ID column.
4. In the SSID column, delete the existing SSID and type Marketing.
5. Select WPA Personal from the menu in the Security column.
Additional fields appear.
6. Select the WPA2 and CCMP (AES) options, and clear the WPA and TKIP options.
7. Enter a WPA encryption key in the Key field.
The key can be a mix of alphanumeric and special characters. The key is case sensitive and can be between 8 and 63
Page 116 Configuring a VAP
VAP
W I
EB NTERFACE
Software User Manual
12/10/09
34CSFP6XXUAP-SWUM100-D13