Software User Manual
12/10/09
S
SSH S
ETTING THE
Secure Shell (SSH) is a program that provides access to the D-Link UAP CLI from a remote host. SSH is more secure than
Telnet for remote access because it provides strong authentication and secure communications over insecure channels.
From the SSH page, you can enable or disable SSH access to the system.
Under the Services heading, click the SSH tab and configure the settings as described in
Field
SSH Status
S
T
ETTING THE
ELNET
Telnet is a program that provides access to the D-Link UAP CLI from a remote host. From the Telnet page, you can enable
or disable Telnet access to the system.
To set the Telnet status, click the Telnet tab under the Services heading and configure the settings as described in
on page
72.
34CSFP6XXUAP-SWUM100-D13
TATUS
Figure 21: SSH Status
Table 31: SSH Settings
Description
Choose to either enable or disable SSH access to the AP CLI:
• To permit remote access to the AP by using SSH, click Enabled.
• To prevent remote access to the AP by using SSH, click Disabled.
S
TATUS
Figure 22: Telnet Status
D-Link UAP
Table
31.
Table 32
Setting the SSH Status
Page 71