Software User Manual
12/10/09
Sec tion 4: Managing the A cce ss Po int
This section describes how to manage the UAP and contains the following subsections:
•
Ethernet Settings
•
Modifying Radio Settings
•
Virtual Access Point Settings
•
Configuring Load Balancing
•
Controlling Access by MAC Authentication
•
Configuring Load Balancing
The configuration pages for the features in this section are located under the Manage heading on the navigation tree of the
UAP Web UI.
E
S
THERNET
ETTINGS
The default wired interface settings, which include DHCP and VLAN information, might not work for all networks.
By default, the DHCP client on the UAP automatically broadcasts requests for network information. If you want to use a static
IP address, you must disable the DHCP client and manually configure the IP address and other network information.
The management VLAN is VLAN 1 by default. This VLAN is also the default untagged VLAN. If you already have a
management VLAN configured on your network with a different VLAN ID, you must change the VLAN ID of the management
VLAN on the AP.
To configure the LAN settings, click the Ethernet Settings tab.
34CSFP6XXUAP-SWUM100-D13
D-Link UAP
Managing the Access Point
Page 37