Setting your machine
Your fax number/your name
Your fax will print out your fax number on each document it transmits if you save this number
and if the machine is set to
page 3-9).
To save your fax number and your name:
Enter your fax number (20 digits max.) and press OK to confirm.
Enter your name (20 characters max) then press OK to confirm.
Type of network
You may connect your fax to either a PSTN or private network such as private automatic branch
exchange (PABX). You must select the network which is the most convenient.
To select the type of network:
Select option
Geographical settings
These settings will enable you to use your machine in different preset countries using different
languages.
Country
By choosing a country, you initialise:
• the settings for the public telephone network,
• the language by default.
To select the country:
Select the required option and press the OK key to confirm.
Network
This setting enables you to individually set the type of public telephone network so that your
machine can communicate over the public network of the country you have chosen in
compliance with the applicable standards.
Remark
:
these settings are different from the
public and private network.
To select the network:
Select the required option and press the OK key to confirm.
SENDING HEADER
2511 OK - SETUP / NETWORKS / TEL. NETWORK / NETWORK TYPE
or
then confirm your choice with OK.
PABX
PSTN
201 OK - SETUP / GEOGRAPHICAL / COUNTRY
NETWORK TYPE
202 OK - SETUP / GEOGRAPHICAL / NETWORK
3-3
(refer to paragraph Technical parameters,
22 OK - SETUP / NUMBER / NAME
(p. 3-3), which allows you to choose between