System Setup; Mounting; Mounting The Orbital Head - High End Systems Roadster Orbital Head System User Manual

System Setup

Mounting

Warnings: Equipment suitable for dry locations only. Do not
Caution: If mirror surface needs to be cleaned during setup
The Roadster Orbital Head system ships with a mounting bracket adapted to the Christie
Roadster S+12 or S+16 high output video projectors. The Orbital Head must be able to rotate
freely. Choose from the recommended lens options to avoid impeding Orbital Head
movement, (see Projector Lens Options on page 4).

Mounting the Orbital Head

To mount the Orbital Head to the projector:
1. Choose from the four available orientation options:
Standard
2. Mount the bracket to the
Orbital head using four M6 x
16 mm hex bolts with lock
washers and flat washers (A).
Roadster Orbital Head System User Manual
expose this equipment to rain or moisture.
procedure, use only a mild glass cleaner (containing
no ammonia) and a soft, lint-free cotton cloth to
avoid scratching mirror surface.
90 Degrees
Flat washer
Lock washer
Bolt
A
Setup and Configuration
270 Degrees
CHAPTER 2
180 Degrees
9