Using The Hd Xlr Microphone Wireless Adapter - Revolabs 01-HDEXEC Installation And Operation Manual

3. With the microphone in position, un-mute the microphone by pressing and releasing the Mute
button (confirm by viewing flashing GREEN LED).
4. To turn microphone off, return the microphone unit to the Charger Base or press and hold the
Mute button for ~10 seconds until the LED turns solid RED and release button.
If the microphones are placed too far from the Base Station (~100 feet or 30 meters) the connection
will be dropped (LED flashes all colors) and the microphone will mute. After 15 seconds the
microphone will beep 5 times, and will continue beeping every 30 seconds to indicating it's out of
range.
Move the microphone closer to the Base Station and the connection will automatically be re-
established to its original state, and the beeping will cease. If not, the microphone will continue
beeping until it turns off in about 15 minutes.

Using the HD XLR Microphone Wireless Adapter

The HD Universal Wireless Adapter for Handheld Microphones, shown in the following figure, is
connected to your existing handheld dynamic microphones for wireless freedom during open mic
meetings, Q&A sessions, classrooms, etc.
1
2
- 24 -
5
4
3