Page 1
Installation and Operation Manual SOLO – Desktop Wireless Microphone System Models 02-DSKSYS, 04-DSKSYSEU Revolabs, Inc. Revolabs, Inc. Revolabs, Inc. Revolabs, Inc. s o l o – D e s k t o p M a n u a l 0 2 - D S K M A N - P A P - 1 1...
Page 3
Warranty Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the discretion of the Seller) will be free of charge for the period of one year. Any attempt by the user to alter the equipment, or equipment damaged by negligence, accident, or Acts of God voids this warranty.
LED Status Indications Table of Table of Contents Contents Table of Table of Contents Contents The following LED patterns are shown on either the Microphone or the Charger Base. Safety and General Information.............1 FCC User Information ...............1 LED pattern Meaning European Compliance...............3 Solid GREEN Confirmation of power-up.
7 seconds (LED solid RED), and equipment in any way. Changes or modifications not then press the MUTE button on the expressly approved by Revolabs, Inc. could void the user’s Charger Base for about 7 seconds authority to operate the equipment (LED solid RED).
Always obey the laws and regulations on the use of these products. 02-DSKSYS North America UPCS Usage Restriction Due to the UPCS frequencies used, this product is licensed for operation only in the United States of America and Canada.
04-DSKSYSEU European Union Usage Restriction Due to the frequencies used, this product is licensed for operation only in the European Union countries. European Compliance This equipment has been approved in accordance with Council Directive 1999/5/EC “Radio Equipment and telecommunications Equipment.” IP telephony and computer telephony applications (Skype, for example) may also offer options for controlling the audio levels and playback capabilities.
Page 8
Sounds and Audio Devices. Introduction Congratulations on the purchase of a Revolabs digital wireless communication system! We are pleased that you have chosen the Solo Desktop Wireless Microphone System with 1.9 GHz DECT technology.
System Components Installation The solo Desktop system is easily installed into either the office or conference room environment. Simply plug the power supply into a convenient outlet and attach the USB cable to a computer or laptop, or connect one of the 2.5mm audio cables to an audio system or telephone headset port.
10 seconds, it means that the Microphone needs to be paired to solo Desktop Charger Base the system. The Charger Base is used for storing and charging the Microphone when not in use. The Microphone must be properly inserted into Microphone Pairing Instructions the base and seated flush for charging to occur.
to return the microphone. If the microphone is moved back into USB Connection range within 5 minutes the connection will automatically be re- established to its original state, and the beeping will cease. If Use the supplied cable to connect the mini USB connector to the not, the microphone will turn off after 5 minutes.
This is normal. The Lithium Polymer rechargeable battery that powers the Microphone is not user serviceable. Please see the Revolabs Knowledge Base website area (www.revolabs.com) for replacement instructions and to assure that the proper disposal method is used.
Need help?
Do you have a question about the 02-DSKSYS and is the answer not in the manual?
Questions and answers