Table of Contents
Advertisement
Boards in PCI slots
Removal/installation routines
Removing the card guide
The card guide serves as an additional holder for full-length PCI-boards
mounted into the lower three slots. You find the card guide above the SCSI hard
disk cage.
Requirements
– server has been switched off
– power cords have been disconnected
– left side cover has been removed
Ê Remove the full-length PCI boards from the lowest PCI slots.
Ê Remove the screw (see arrow).
Ê Take the card guide out of the server.
Mounting is performed in reverse order.
02
TX150S2
106
July 2004
–
–
U41057-J19-Z146-1-76
Advertisement
Table of Contents
