Fujitsu PRIMERGY TX150 S2 Manual page 63

Installation and initial operation
Addresses for SCSI devices
Each device which is connected to the SCSI interface or to a SCSI controller
(hard disks and other drives) must have an unambigous address.The address
is called ID (identifier). When connecting drives, make sure, that no ID is
assigned more than once.
On the SCA hard disks, the IDs needn't to be set. For each hard disk bay a
corresponding ID is determined by hardware (SCSI backplane). It is not
possible to change this IDs.
Hard disk ID3
Hard disk ID2
Hard disk ID1
Hard disk ID0
SCSI addresses with HDD extension box:
U41057-J19-Z146-1-76
CD-ROM
HD ID2
HDD extension box
HD ID1
HD ID0
Floppy
HD ID3
HD ID2
HD ID1
HD ID0
July 2004
Internal cabling
02 TX150S2 63
– –