System board
Main memory
There are four slots for main memory. You can install 256 Mbyte, 512 Mbyte and
1 Gbyte DDR DIMM memory modules. The board supports a maximum of
4 Gbytes. Memory modules with different memory capacities can be combined.
You may only use unbuffered 3.3 V memory modules. Buffered memory
!
modules are not allowed and lead to a device failure. DDR DIMM
memory modules may meet the PC2100/2700/3200 specification.
The following memory configurations are possible:
Mode
1x memory module
S26361-F3019-E51x
(single-channel)
2x memory module
S26361-F3019-E51x
(single-channel)
3x memory module
S26361-F3019-E51x
(single-channel)
4x memory module
S26361-F3019-E51x
(single-channel)
1x memory
S26361-F3019-E52x
(dual-channel)
1x memory
S26361-F3019-E52x
(dual-channel)
2x memory
S26361-F3019-E52x
(dual-channel)
In the dual-channel configuration you must install identical memory
!
modules in DIMM 0A and 0B (blue slots) and identical memory modules
in DIMM 1A and 1B (black slots).
02
TX150S2
108
–
–
DIMM 0A
DIMM 1A
(blue)
(black)
populated
populated
populated
populated
populated
populated
populated
populated
populated
populated
populated
July 2004
Removal/installation routines
DIMM 0B
(blue)
populated
populated
populated
populated
U41057-J19-Z146-1-76
DIMM 1B
(black)
populated
populated
populated