Roland Metaza MPX-80 User Manual page 81

™
š
Click [OK].
The [Details] window closes.
›
Click [OK].
The setting window closes.
This completes registration of a composition and a striking force appropriate for it. To obtain printing result of even
higher quality, carry out test printing and overprinting on the same material, and adjust the impact values while
examining the printing results.
Enter a name for the composition you're registering.
Adjust the impact values.
The printing results vary according to the hardness of the material. Adjust to
match the material.
Raise
• When dark areas of the image are not struck
Lower
• When dark areas of the image are whitish (too bright)
• When overall striking is too forceful
Raise
• When bright areas of the image are struck with too
little force (too dark)
• When overall striking is too weak
Lower
• When white areas of the image are struck with too
much force
5-5 Registration of Custom Material
Chapter 5 Maintenance and Adjustment 79