Checking The State Of The Marking Pins - Roland Metaza MPX-80 User Manual

5-2 Maintenance of the Head and the Marking Pins

Checking the State of the Marking Pins

The state of each pin is shown.
If the indicator for the pin you're using is red, then replace it with a new pin.
If attractive printing is impossible or printed images are uneven even though the scale is not red, then change to a new
pin.
72 Chapter 5 Maintenance and Adjustment
A pin needs to be replaced when it is shown in red.
This indicates the amount of pin usage. The indicator
display increases a little at a time as striking is per-
formed. The rate of increase varies according to the
material printed.
Pins for which nothing is displayed are unused.
This refreshes the screen to display the latest information.