Unpacking - Roland Metaza MPX-80 User Manual

Unpacking

Retaining materials are attached to protect the machine from vibration during shipment. Remove these after emplace-
ment.
➢ Remove all Retaining materials. Any that remain may cause faulty operation or breakdown when the power is
switched on.
➢ The Retaining materials are required when moving the machine to a different location. Store them carefully so that
they do not get misplaced.
Procedure
–
Knob
—
˜
Retainer A
™
Hold here
and lift.
Open the cover.
Loosen the knob.
Remove the retaining screw and store
it at the location shown in the figure.
Retaining screw
Store here.
Remove retainer A.
Holding the unit at the locations shown
in the figure, lift the head unit and re-
move retainer B.
Retainer B
Chapter 2 Getting Ready to Print
2-1 Installation
19