Loading Material (Using The Center Vise); Using The Center Vise - Roland Metaza MPX-80 User Manual

3-5 Loading Material (Using the Center Vise)

Using the Center Vise

With the center vise, you secure material in place by clamping it in the vise. The act of securing material in place with
the vise always determines the center position of the material in the horizontal direction at the horizontal center
position of the machine's table. For the vertical center position, you perform adjustment using the scale on the vise as
a guide.
You can also vary the orientation of the vise when using it. Use it in a way matched to the size and shape of the
material.
P. 28, "Preparing Material to Print"
This is suitable for clamping plate-shaped material.
Correspondence Between the Center Vise Scale and the Table Scale
(1 scale tick = 5 mm)
Vice
You can also install it with the front and back
reversed.
This is suitable for clamping cylindrical material.
Table
Chapter 3 Performing Printing 33