Cisco 7906G User Giude page 62

If you want to...
Assign a Fast Dial
code to a PAB entry
Add a new Fast Dial
code (not using a PAB
entry)
Search for Fast Dial
codes
Place a call using a
Fast Dial code
Delete a Fast Dial
code
Log out of Personal
Directory
Tips
• Your system administrator can provide you the user ID and PIN that you need to log in to Personal
Directory.
• Personal Directory automatically logs you out after a certain amount of time. This time limit can
vary. Ask your system administrator for more information.
• Use the numbers on your keypad to enter characters on your phone screen. Use the Navigation
button on your phone to move between input fields.
• Your phone might be set up for international call logging, which is indicated by a "+" symbol on
the call logs, redial, or call directory entries. See your system administrator for more information.
56
Then...
1. Search for a PAB entry.
2. Highlight the listing and press Select.
3. Press Fast Dial.
4. Highlight the number that you want to dial and press Select.
5. Highlight any unassigned Fast Dial code that you want to assign to the
number and press Select.
1. Press , and choose Directories > Personal Directory > Personal Fast
Dials.
2. Highlight a Fast Dial code that is unassigned and press Assign.
3. Enter a phone number.
4. Press Update.
1. Press , and choose Directories > Personal Directory > Personal Fast
Dials.
2. Choose Next to move through listings.
1. Search for a Fast Dial code.
2. Press Dial.
1. Search for a Fast Dial code.
2. Highlight the listing you want and press Remove.
3. Press Remove again.
1. Press , and choose Directories > Personal Directory (exact name can
vary).
2. Choose Logout.
3. Press OK.
OL-22336-01