Placing A Call-Additional Options - Cisco 7906G User Giude

Placing a Call—Additional Options
You can place calls using special features and services that might be available on your phone. See your
system administrator for more information about these additional options.
If you want to...
Dial from a corporate
directory on your personal
computer using
Cisco WebDialer
Use CallBack to receive
notification when a busy or
ringing extension is available
Make a priority (precedence)
call (SCCP phones only)
Dial from a Personal Address
Book (PAB) entry
Place a call using a billing or
tracking code
(SCCP phones only)
Place a call using your Cisco
Extension Mobility profile
16
Then...
1. Open a web browser and go to a
WebDialer-enabled corporate
directory.
2. Click the number that you want to
dial.
1. Press CallBack while listening to the
busy tone or ring sound.
2. Hang up. Your phone alerts you when
the line is free.
3. Place the call again.
Note The CallBack feature is disabled on a
Call Chaperone user's Cisco Unified
IP Phone when the calls are being
chaperoned.
Enter the Multilevel Precedence and
Preemption (MLPP) access number, then
enter a phone number.
1. Press and select Directories >
Personal Directory to log in.
2. Choose Personal Address Book and
search for a listing.
1. Dial a number.
2. After the tone, enter a client matter
code (CMC) or a forced authorization
code (FAC).
Log in to the Cisco Extension Mobility
service on a phone.
For more information,
see...
Using
Cisco WebDialer,
page 69.
Your system
administrator.
Prioritizing Critical
Calls, page 38.
• Using the Cisco
Unified CM User
Options Web
Pages, page 59.
Using Personal
•
Directory on Your
Phone, page 55.
Your system
administrator.
Using Cisco Extension
Mobility, page 39.
OL-22336-01