Floppy Disk(S) Fail (80) → Unable To Reset Floppy Subsystem; Floppy Disk(S) Fail (40) → Floppy Type Dismatch; Hard Disk(S) Fail (80) → Hdd Reset Failed; Hard Disk(S) Fail (40) → Hdd Controller Diagnostics Failed - Avalue Technology ECM-945GSE User Manual

28. FLOPPY DISK(S) fail (80) → Unable to reset floppy subsystem.
29. FLOPPY DISK(S) fail (40) → Floppy Type dismatch.
30. Hard Disk(s) fail (80)
31. Hard Disk(s) fail (40)
32. Hard Disk(s) fail (20)
33. Hard Disk(s) fail (10)
34. Hard Disk(s) fail (08)

35. Keyboard is locked out - Unlock the key.

BIOS detect the keyboard is locked. P17 of keyboard controller is pulled low.

36. Keyboard error or no keyboard present.

Cannot initialize the keyboard. Make sure the keyboard is attached correctly and no keys
are being pressed during the boot.

37. Manufacturing POST loop.

System will repeat POST procedure infinitely while the P15 of keyboard controller is pull
low. This is also used for M/B burn in test.

38. BIOS ROM checksum error - System halted.

The checksum of ROM address F0000H-FFFFFH is bad.

39. Memory test fail.

BIOS reports the memory test fail if the onboard memory is tested error.

40. POST Codes

Please take reference to Phoenix-Award website for the latest post codes.
http://www.phoenix.com/en/OEM-ODM/Customer+Services/BIOS/AwardBIOS/Award+Erro
r+Codes.htm
→ HDD reset failed.
→ HDD controller diagnostics failed.
→ HDD initialization error.
→ Unable to recalibrate fixed disk.
→ Sector Verify failed.
ECM-945GSE User's Manual 93
User's Manual