Avalue Technology ECM-945GSE User Manual page 22

ECM-945GSE
•
Locate the SODIMM socket on the board.
•
Hold two edges of the SODIMM module carefully. Keep away of touching its
connectors.
•
Align the notch key on the module with the rib on the slot.
•
Firmly press the modules into the socket automatically snaps into the mounting notch.
Do not force the SODIMM module in with extra force as the SODIMM module only fit
in one direction.
•
To remove the SODIMM modules, push the two ejector tabs on the slot outward
simultaneously, and then pull out the SODIMM module.
Note:
(1) Please do not change any DDR2 SDRAM parameter in BIOS setup to increase
your system's performance without acquiring technical information in advance.
(2) Static electricity can damage the electronic components of the computer or
optional boards. Before starting these procedures, ensure that you are
discharged of static electricity by touching a grounded metal object briefly.
22 ECM-945GSE User's Manual
Mounting Notch
Ejector
200-pin DDRSODIMM
Notch Key