Security Option; Apic Mode; Mps Version Control For Os; Os Select For Dram > 64Mb - Avalue Technology ECM-945GSE User Manual

3.5.2.13 Security Option

Select whether the password is required every time the system boots or only when you
enter setup.
Item
The system will not boot and access to Setup will be denied if the correct password is
System
not entered at the prompt.
The system will boot, but access to Setup will be denied if the correct password is not
Setup
entered at the prompt.
Note: To disable security, select PASSWORD SETTING at Main Menu and then
you will be asked to enter password. Do not type anything and just press
<Enter>, it will disable security. Once the security is disabled, the system
will boot and you can enter Setup freely.

3.5.2.14 APIC Mode

The BIOS supports versions 1.4 of the Intel multiprocessor specification. When enabled,
The MPS Version 1.4 Control for OS can be activated.
The choice: Enabled/Disabled.

3.5.2.15 MPS Version Control For OS

This feature is only applicable to multiprocessor board as it specifies the version of the
Multi-Processor Specification (MPS) that the board will use.
The choice: 1.4, 1.1.
3.5.2.16 OS Select for DRAM > 64MB
Select the operating system that is running with greater than 64MB of RAM on the system.
Item
Non-OS2 Disable OS for over 64 MB DRAM
OS2 Enable OS for over 64 MB DRAM

3.5.2.17 Report No FDD For WIN95

The original Windows95 requires the presence of a floppy. Unless the BIOS tells it to
disregard the absence of the drive, it will generate an error message. For other operating
systems as Win98 etc this field is without relevance.
Item
No Don't generate error message
Yes Generate error message
Description
Description
Description
ECM-945GSE User's Manual 57
User's Manual