Boot Up Numlock Status; Gate A20 Option; Typematic Rate Setting; Typematic Rate (Chars/Sec) - Avalue Technology ECM-945GSE User Manual

ECM-945GSE

3.5.2.8 Boot Up NumLock Status

Select power on state for NumLock.
Item
On Enable NumLock
Off Disable NumLock

3.5.2.9 Gate A20 Option

Select if chipset or keyboard controller should control Gate A20.
Item
Normal A pin in the keyboard controller controls Gate A20
Fast Lets chipset control Gate A20

3.5.2.10 Typematic Rate Setting

This feature enables you to control the keystroke repeat rate when you depress a key
continuously. When enabled, you can manually adjust the settings using the two typematic
controls (Typematic Rate and Typematic Delay). If disabled, the BIOS will use the default
setting.
Item
Enabled Enable typematic rate/delay setting
Disabled Disable typematic rate/delay setting

3.5.2.11 Typematic Rate (Chars/Sec)

This is the rate at which the keyboard will repeat the keystroke if you press it continuously.
This setting will only work if Typematic Rate Setting is enabled..
Options: 6, 8, 10, 12, 15, 20, 24, 30

3.5.2.12 Typematic Delay (Msec)

This is the delay, in milliseconds, before the keyboard automatically repeats the keystroke
that you have pressed continuously. This setting will only work if Typematic Rate Setting is
enabled.
Options: 250, 500, 750, 1000
56 ECM-945GSE User's Manual
Description
Description
Description