ECM-945GSE
3.5.5.12 Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state when the system has "hung".(Only could working on ATX Power supply)
The choices: Delay 4 Sec, Instant-Off.
3.5.5.13 Wake Up by PCI Card
This will enable the system to wake up through PCI Card peripheral.
The choices: Enable, Disabled.
3.5.5.14 Power On By Ring
This determines whether the system boot up if there's an incoming call from the Modem.
The choices: Enable, Disabled.
3.5.5.15 Resume By Alarm
This function is for setting date and time for your computer to boot up.
The choices: Enabled, Disabled.
3.5.5.16 Date<of Month>/Time<hh:mm:ss> Alarm
After enabled "Resume By Alarm", set the specific date/hour/minute/second specified in
these fields.
The choices: Alarm Date: 01-31, Every Day / Alarm Hour: 00-23 /
Alarm Minute: 00-59/ Alarm Second: 00-59
3.5.5.17 Primary/Secondary IDE 0/1, FDD,COM,LPT PORT, PCI PIRQ[A-D]#
Reload Global Timer events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awake the system from such a mode. In effect ,the
system remain alert for anything which occurs to a device which is configured as
Enabled ,even when the system is in a power down mode.
The choices: Enabled, Disabled.
70 ECM-945GSE User's Manual