Table of Contents
Advertisement
ECM-945GSE
3.5.1.2 IDE Adapter Setup
The IDE adapters control the hard disk drive. Use a separate sub menu to configure each
hard disk drive. The below table will shows the IDE primary master sub menu.
Item
IDE HDD Auto-detection
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
Access Mode
The following options are selectable only if the 'IDE Channel ...' item is set to 'Manual'
Cylinder
Head
Precomp
Landing zone
Sector
52 ECM-945GSE User's Manual
Options
Press Enter
None
Auto
Manual
CHS, LBA
Large, Auto
Min = 0
Max = 65535
Min = 0
Max = 255
Min = 0
Max = 65535
Min = 0
Max = 65535
Min = 0
Max = 255
Description
Press Enter to auto-detect the HDD on
this channel. If detection is successful,
it fills the remaining fields on this
menu.
Selecting 'manual' lets you set the
remaining
fields
on
Selects the type of fixed disk. "User
Type" will let you select the number of
cylinders,
heads,
PRECOMP=65535 means NONE !
Choose the access mode for this hard
disk
Set the number of cylinders for this
hard disk.
Set the number of read/write heads
**** Warning: Setting a value of 65535
means no hard disk
****
Number of sectors per track
this
screen.
etc.
Note:
Hide quick links:
Advertisement
Table of Contents
