When The Printer Does Not Operate Properly; Changing The Language Used In The Display - Canon lbp5970 Getting Started Manual

When the Printer Does Not Operate
Properly
If the printer does not operate even after turning it ON or print Configuration
Page Print properly, the following causes are conceivable.
Symptom
The printer cannot be The power plug is
turned ON. unplugged from the AC
power outlet.
There is a break in the
power cord.
The indicators on the The printer is not ON.
control panel do not come
on.
The printer is in Power
Save Mode.
The printer does not The printer is offline.
operate.
The interface cable is
disconnected.
Downloaded from ManualsPrinter.com Manuals
Cause Remedy
Plug the power plug into
the AC power outlet.
If the printer is turned ON
after replacing the power
cord with the one that is of
the same type and is used
for other device, there is a
break in the power cord. In
this case, purchase a new
power cord and replace it
with the broken one.
Turn the printer ON.
The printer will be ready to
print after you send print
data or press any key on
the control panel.
Press [Online] to turn on
the Online indicator.
Connect the interface cable
firmly to the interface
connectors on the
computer and printer unit.
Symptom
A paper jam occurs each The amount of the paper
time you print. loaded in the paper
cassette or multi-purpose
tray exceeds the load
limitation.
Paper is not loaded
properly in the paper
cassette or multi-purpose
tray.
Unusable paper is loaded
in the paper cassette or
multi-purpose tray.
There is still jammed paper
inside the printer.
Nothing is printed on the Multiple sheets of paper
paper. were fed at a time.
Any drum cartridge was
installed with the sealing
tape still attached.
The Message indicator is Some problem has
on and a message is occurred.
displayed in the display.
Changing the Language Used in the
Display
The default value of the language used in the display is [ENGLISH].
You can change the display language to [FRENCH], [GERMAN], [ITALIAN], or
[SPANISH] using the following procedure.
Cause Remedy
Reduce the amount of
paper to within the load
limitation and print again.
Load the paper properly
and print again.
Replace the paper with one
that can be used and print
again.
Remove any jammed
paper and print again.
Align the paper stack in the
paper cassette or multi-
purpose tray properly and
load it again. If you are
using coated paper or
labels, fan them thoroughly
and load them again.
Take the drum cartridge out
of the printer, pull out the
sealing tape, and then
reinstall the drum cartridge.
See "Chapter 7
Troubleshooting" in
CD-ROM
User's Guide and solve the
problem.
Step
7
43