Specifying Forward - Konica Minolta bizhub 162 Facsimile Manual

5

Specifying FORWARD

1
Select the
ERATION menu.
For details, refer to page 5-52.
2
Press the [*] and [)] keys to select
either ON,
then press the [Yes] key.
– If
ed, a screen appears, allowing you to specify the forwarding loca-
tion. (Continue with step 4.)
– If
3
Using the one-touch dial keys or the
speed dial numbers, or by entering
the fax number using the 10-key pad,
specify a fax number, and then press
the [Yes] key.
The RX OPERATION menu appears again.
Note
An e-mail address can be specified as a forwarding location only when
the optional scanner unit SU-502 is installed.
For details, refer to the user's guide for the scanner unit SU-502.
5-56
in the RX OP-
FORWARD
or OFF, and
ON(PRINT)
or
ON ON(PRINT)
was selected, the RX OPERATION menu appears again.
OFF
was select-
Using the utility mode
Fax kit FK-505