Specifying The Setting For "Forward - Konica Minolta bizhub 161f User Manual

7.9 Setting Up the Reception

Specifying the Setting for "FORWARD"

1
Select the "RX OPERATION".
❍ Refer to "Selecting the "RX OPERATION" menu" on page 7-64.
2
Press the [6] key from the 10-Key
Pad to select "FORWARD".
3
Using the [ ] and [Ö ] keys, select
Ö
"ON", "ON(PRINT)" or "OFF", and
then press the [Yes] key.
❍ If "ON" or "ON(PRINT)" was
selected, a screen appears,
allowing you to specify the forwarding location. (Continue with step 4.)
❍ If "OFF" was selected, the "RX OPERATION" menu appears again.
4
Using the one-touch dial keys or
the speed dial numbers, or by
entering the fax number using the
10-Key Pad, specify a fax number,
and then press the [Yes] key.
The "RX OPERATION" menu appears again.
Tip
An e-mail address can be specified as a forwarding location only when the
optional Scanner Unit SU-502 is installed.
For details, refer to the User's Guide for the Scanner Unit SU-502.
bizhub 161f
7
7-69